MNC Valves Ltd.
25+ Years Experience in industrial valve manufacturing and supply
Size range available from DN15 to DN50
Suitable for advanced compact multi-port routing applications
Preferred where process control requires more than standard 3-way functionality
MNC VALVES LIMITEDΒ is a trusted manufacturer and supplier of 4 Way Screwed Ball Valves engineered for compact advanced routing applications where multiple lines must be connected, redirected, or isolated through one integrated valve body. These valves are selected in smaller systems where process logic is more complex than standard 2-way or 3-way applications.
The 4 way screwed design combines advanced multi-port flow control with the convenience of threaded-end installation. It is suitable for compact OEM units, skids, utility panels, machine-connected systems, and process routing assemblies where installation space is limited and directional control is important.
AΒ 4 Way Screwed Ball ValveΒ is a multi-port quarter-turn valve with four ports arranged in a compact threaded-end body. It is designed to control complex flow direction logic through a specially machined internal ball configuration that can connect, isolate, or reroute media between multiple lines.
This valve category is commonly selected where the buyer needs compact multi-line control, reduced piping complexity, and integrated routing logic in smaller size systems.
Special internal porting allows more complex routing logic than standard 2-way or 3-way ball valves.
Supports compact installation in smaller process, OEM, and utility systems.
Provides rapid switching and directional control through a compact mechanical design.
4 way screwed ball valves are used where media must be redirected between multiple connected flow paths in compact systems.
Depending on internal port geometry, the valve can connect, isolate, or redirect multiple passage combinations through one compact unit.
Details
4 Way Ball Valve
Screwed End / Threaded End
DN15 to DN50
As per design and application requirement
4 Way Multi-Port Configuration
As per flow design requirement
BSP / NPT as required
API 598
Lever / Pneumatic / Electric
WCB / CF8 / CF8M
PTFE / RPTFE
4 way screwed ball valves are generally selected in smaller size compact systems where threaded-end installation is suitable. Final pressure capability depends on design, size, thread integrity, and process condition.
Temperature capability depends on seat material and media service. PTFE and RPTFE are suitable for many compact industrial and utility applications within design limits.
Suitable where smaller line systems need more than 3-way functionality.
Can reduce the number of separate valves and fittings in compact integrated systems.
Supports compact installation in OEM, skid, and machine-connected applications.
Suitable for integrated routing logic where compact design is important.
Used where multiple flow directions must be managed within a small system footprint.
Useful where advanced directional control is needed in smaller process lines.
Suitable for pneumatic or electric operation in advanced switching applications.
Applicable where one compact valve must handle multiple routing functions.
Used where integrated multi-line logic improves overall process efficiency.
Flow Control Complexity
Higher
Moderate
Main Use
Advanced routing and multi-line switching
Mixing / diverting / switching
Selection Complexity
Higher
Lower than 4 way
Typical Application
Compact advanced routing systems
Compact multi-directional control
Industrial understanding built through long market and application exposure.
Technical guidance for selecting the correct advanced multi-port routing configuration.
Structured manufacturing and testing approach for dependable compact routing performance.
Connect withΒ MNC VALVES LIMITEDΒ for technical support, compact multi-port routing guidance, and quotation for your industrial requirement.
Technical support for selection
Quotation support for project needs
Application-focused product guidance
Business-ready follow-up action
It is a compact multi-port quarter-turn valve used for advanced directional control and routing between four connected paths.
The size range for screwed end 4 way ball valves is DN15 to DN50.
A 4 way valve is used where the process needs more advanced routing logic than a 3 way valve can provide.
BSP and NPT thread standards are commonly used depending on application and project requirement.
The main advantage is advanced multi-line control in a compact threaded-end valve arrangement.
WCB, CF8, and CF8M are commonly used depending on media and corrosion condition.
PTFE and RPTFE are commonly used depending on pressure, temperature, and media requirements.
Yes, with suitable stainless steel body and compatible seat material selection.
It is mainly selected for advanced routing and switching rather than precision throttling duty.
Yes, manual, pneumatic, and electric operated versions can be provided depending on requirement.
OEM systems, skids, utility panels, compact control systems, and advanced machine-connected routing applications commonly use it.
Threaded ends support compact practical installation in smaller piping and machine-connected systems.
Yes, in suitable compact layouts it can reduce the need for several separate valves and fittings.
The internal port arrangement must be matched carefully with the actual process routing requirement.
Periodic inspection of seats, ball surface, stem sealing, and operating smoothness is recommended.
Valve size, pressure, seat material, media condition, and internal port geometry affect torque requirement.
No, screwed-end multi-port designs are generally preferred in smaller sizes, which is why this range is limited to DN15 to DN50.
Yes, it is suitable for pneumatic or electric operation in compact advanced routing applications.
Yes, because the internal routing logic must precisely match the required application function.
Because MNC VALVES LIMITED offers application-based technical support, reliable manufacturing quality, and practical compact multi-port valve solutions.